Contact | Search | Home  
       
Home Hovercrafts Pneumatic Cannons  Other Projects FAQ Contact Us Products   

 

   

Info
Spud Gun?
Are they legal?

Pneumatic
P.A.C. 1
P.A.C. 2
P.A.C. 3
P.A.C. 4
P.A.C. 5
P.A.C. 6

Combustion
CB 2
4 in. to 2 in.
TP Cannon
Ignition
Propellants

Other
H20 Rocket
Water Cannon
Cap Cannon
Bottle Cannon

Accessories
Silencer
Breech Loader
Bipod
Stand
Extension

Projectiles
List
Flares
Cartridges
Parachute
Fined Darts

Media
Pictures
other
Video

Other
Programs
Links
FAQ
Hovercrafts


Website Info
F.A.Q.
Contact Us
The Founder
Disclaimer
Policies&Services

Last Updated:
Wednesday, Sept 19, 2004 - 8:12 p.m. Pacific Time 

2000-2005
Xinventions.com

 


Toilet Paper Cannon

TP is very fun to launch. You can launch a whole roll of toilet paper and watch it un-roll through the air (be careful, the TP can catch on fire). This is good for TP'n someone's house, yard, trees, the whole block!

Any cannon can be used to shoot toilet paper. It just requires the cannon to have a 14" long 4" wide barrel. You will also need wadding when shooting TP. Bellow are instructions for making the perfect wadding. My CB 2 cannon works great for shooting TP. It can shoot it about 150 feet. Here is a picture of my CB 2 with a TP barrel:

If you desire more detailed plans on how to build this cannon, I now have them available here.  The plans included full plans on how to build this cannon as well as the CB2 Cannon.

 

Wadding Information:

Wadding: To make this work you might want a drawing compass to help you cut the circles.  If you don't have one you can take a piece of cardboard and put it up against the barrel and trace around it.  So which ever you choose to do make the circles 4" in diameter.   You can use scissors to cut them out.  Keep them close in size.  Make 2 or 4 of these.  Tape them or hot glue them together.  That should be your wadding.    Sand the edges a little for better performance.

Another more simple way to make wadding is to use a soda bottle. Push the soda bottle into the barrel and cut off the excess bottle. After the wad is cut remove and turn upside down (open end goes in the barrel first). Push the wad all the way to the bottom of the barrel and then insert the TP.

 

 

2000-2004 Xinventions. All rights reserved.

Contact Us Policies & Services